How to check data chanel and info chanel (MikroTik + USB Modem / 3G Modem)

[admin@MikroTik] > /system serial-terminal usb2 channel=2

[Ctrl-A is the prefix key]


ATI
Manufacturer: Option N.V.
Model: GTM378
Revision: 2.3.3Hd (Date: Jul 17 2007, Time: 15:49:23)

OK

reference : http://wiki.mikrotik.com/wiki/Option_Globetrotter_HSDPA_USB_Modem

Using netinstall to update MikroTik

1. Download netinstall (http://www.mikrotik.com/download)
2. Download the package (http://www.mikrotik.com/download)
3. Run/Open netinstall
4. Click "Net Booting" button
5. Check "Boot Server Enabled"
6. Fill client IP address with 192.168.88.10 (in this example my computer IP address is 192.168.88.9)
7. Connect router board and PC via ether1
8. Turn off the router board
9. User paper clip or something to push the reset button on the router board
10. Push and hold the reset button, turn on the router board, stay hold the reset button until the act indicator stop flashing
11. Wait 10-20 seconds it should detected from netinstall
12. Select the package and click install button

NB: I use RB951

Reference :

• http://adamonline.web.id/mikrotik/cara-reset-mikrotik-dengan-netinstall

Reset mikrotik to factory default using reset button

1. turn off mikrotik, press and hold button reset (using paper clip or something)
2. apply power (plug the device power), and wait until the ACT LED starts flashing. Now release the button to clear configuration.

Note: If you wait until LED stops flashing, and only then release the button - this will instead launch Netinstall mode, to reinstall RouterOS.